McCulloch B40 P ELITE Betreibershandbuch PDF herunterladen (Seite 13)

ASSEMBLY

English – 13

• Place the blade (D), support ﬂange (E) and support

cup (F) on the output shaft.

• Fit the nut (G). The nut must be tightened to a torque

of 35-50 Nm (3.5-5 kpm). Use the socket spanner in

the tool kit. Hold the shaft of the spanner as close to

the blade guard as possible. To tighten the nut, turn

the spanner in the opposite direction to the direction

of rotation (Caution" left-hand thread).

Fitting the trimmer guard and trimmer

head

• Fit the correct trimmer guard (A) for use with the

trimmer head.

• Hook the trimmer guard/combination guard onto the

#tting on the shaft and secure with the bolt (L).

• Fit the drive disc (B) on the output shaft.

• Turn the blade shaft until one of the holes in the drive

disc aligns with the corresponding hole in the gear

housing.

• Insert the locking pin (C) in the hole to lock the shaft.

• Screw on the trimmer head/plastic blades (H)

anticlockwise.

• To dismantle, follow the instructions in the reverse

order.

Fitting the transport guard

Attach the transport cover on the blade as shown.

Adjusting the harness and brush

cutter

WARNING! When using a brush cutter it

must always be hooked securely to the

harness. Otherwise you will be unable to

control the brush cutter safely and this

can result in injury to yourself or others.

Never use a harness with a defective

quick release.

S1154653-38,B40 B,P ELITE_1.fm Page 13 Wednesday, March 14, 2012 7:51 AM

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 79 80

Keine Kommentare

McCulloch B40 P ELITE Betreibershandbuch Seite 13